The Leak Stopper – and More!
The First Choice for Fast, Reliable Mechanical Repairs.
Available in unique, convenient ENECON® ‘A – Packs.’
METALCLAD SpeedAlloy is a quick curing, 100% solids, polymeric ‘leak stopper’ used for making fast, effective repairs to equipment which must be returned to service almost immediately.
METALCLAD SpeedAlloy has a paste consistency when first mixed then transforms into a metal-hard composite in just minutes.
- Quick Curing
- Trowelable
- Requires No Heat
- Unlimited Shelf Life
- 100% Solids
- Safe & Simple To Use
Use on...
- Pipes & Tanks
- Sumps
- Radiators & Fuel tanks
- Cracked & holed casings
- Damaged keyways
- Stripped threads
- Scored shafts
- Hydraulic rams
Technical Data
- Volume capacity per 167gm "A Pack"
- 4.3 in3 / 72 cc
- Mixed density
- 0.085 lbs per in3 / 2.33 gm per cc
- Coverage rate per "A Pack" @ 0.25 in / 6mm
- 17.2 in2 / 0.012 m2
- Shelf life
- Indefinite
- Volume Solids
- 100%
| Mixing ratio | Base | Activator |
|---|---|---|
| By Volume | 1 | 1 |
| By Weight | 2 | 1 |
Working Life and Cure Times
| Ambient Temperature | Working Life | Machining Light Load | Full Mechanical | Chemical Immersion | |
|---|---|---|---|---|---|
| 41°F | 5°C | 10 min. | 60 min. | 2 hrs. | 72 hrs. |
| 59°F | 15°C | 7 min. | 45 min. | 1 hrs. | 48 hrs. |
| 77°F | 25°C | 5 min. | 30 min. | 40 min. | 36 hrs. |
| 86°F | 30°C | 3 min. | 20 min. | 30 min. | 24 hrs. |
Physical Properties
| Typical Values | Test Method | ||
|---|---|---|---|
| Compressive strength | 22,500 psi | 1575 kg/cm2 | ASTM D-695 |
| Flexural strength | 16,100 psi | 1125 kg/cm2 | ASTM D-790 |
| Izod impact strength | 1.3 ft lbs/in | 0.69 j/cm | ASTM D-256 |
| Hardness - Rockwell | R-90 | ASTM D-785 | |
| Hardness - Shore D | 84 | ASTM D-2240 | |
| Tensile Shear Adhesion | |||
| Steel | 2300 psi | 161 kg/cm2 | ASTM D-1002 |
| Aluminum | 2100 psi | 147 kg/cm2 | ASTM D-1002 |
| Copper | 2250 psi | 158 kg/cm2 | ASTM D-1002 |
| Stainless Steel | 1800 psi | 126 kg/cm2 | ASTM D-1002 |
| Surface resistivity | 1 x 1015 ohms | ASTM D-257 | |
| Volume resistivity | 1 x 1015 ohm/cm | ASTM D-257 | |
| Dielectric constant | 7.5 | ASTM D-150 | |
Chemical Resistance
| Acetic acid (0-10%) | EX | Methyl alcohol | G |
| Acetic acid (10-20%) | G | Methyl ethyl ketone | G |
| Acetone | G | Nitric acid (0-10%) | EX |
| Aviation fuel | EX | Nitric acid (10-20%) | G |
| Butyl alcohol | EX | Phosphoric acid (0-5%) | EX |
| Calcium chloride | EX | Phosphoric acid (5-10%) | G |
| Crude oil | EX | Potassium chloride | EX |
| Diesel fuel | EX | Propyl alcohol | EX |
| Ethyl alcohol | G | Sodium chloride | EX |
| Gasoline | EX | Sodium hydroxide | EX |
| Heptane | EX | Sulfuric acid (0-10%) | EX |
| Hydrochloric acid (0-10%) | EX | Sulfuric acid (10-20%) | G |
| Hydrochloric acid (10-20%) | G | Toluene | G |
| Kerosene | EX | Xylene | EX |
EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.
Extended Information
Ask an ENECON Tech
Fill out my online form.
Sign up for ENECON's latest Repair - Don't Replace solution
Fill out my online form.