Ultra High-Performance Structural Adhesive.
Universal Surface Bonding Agent.
ENECLAD SuperBond is a revolutionary structural adhesive that provides unrivaled performance when bonding a new concrete overlay to an existing, cured concrete surface or when bonding synthetic/plastic mortars to virtually any rigid surface. When used to bond new concrete to old, the strength of the resultant bond is many times greater than that of monolithic concrete!
SuperBond is a 100% solids, two-component, high performance polymer composite exhibiting extraordinary adhesion to smooth concrete, tile, stone, brick, block, terrazzo, marble, metal, wood and even glass! SuperBond is great for improving the adhesion of conventional structural caulking materials used in expansion and control joints.
As a universal bonding agent, SuperBond is ideal as a bond coat for many types of conventional paint systems or for surfaces that are traditionally difficult to coat - galvanizing, glazed ceramic tile, glass, stainless steel, and aluminum.
SuperBond can even be used as a bonding agent for permanent immersion applications such as in swimming pools or on ships’ hulls. It cures chemically, transforming the bond-line into a highly durable, waterproof film.
ENECON Corporation is a qualified supplier to the U.S. Department of Defense. We’ve been supplying high performance polymer composites to the U.S. Navy for many years. ENECLAD SuperBond is a direct result of our on-going research and development efforts to provide the finest polymer systems for some of the toughest industrial and commercial applications.
ENECLAD SuperBond creates a strong, durable and waterproof seal between cement and mortar, mortar and metal, even mortar and ceramic tile - the glazed side!
- No Odor
- 100% Solids
- Excellent Abrasion & Impact Resistance
- Outstanding Adhesion
- Safe and Simple to Use
Before and After Examples
Move the slider on each photo left and right to see the difference
Technical Data
- Coverage rate per kg. @ 5 mils
- 40-45 ft2 / 4 m2
- Shelf life
- Indefinite
| Mixing ratio | Base | Activator |
|---|---|---|
| By Volume | 5 | 1 |
| By Weight | 10 | 1 |
Working Life & Cure Times
| Ambient Temperature | Working Life | Light Load | Full Mechanical | |
|---|---|---|---|---|
| 50°F | 10°C | 4 hrs. | 24 hrs. | 10 days |
| 59°F | 15°C | 90 min. | 14 hrs. | 7 days |
| 77°F | 25°C | 45 min. | 8 hrs. | 4 days |
| 86°F | 30°C | 25 min. | 4 hrs. | 3 days |
Physical Properties
| (ASTM D- 4541) Direct Tensile Adhesion to: | Bond Strength (psi) | Failure Mode |
|---|---|---|
| *Unblasted Carbon Steel | 1500 | Stud and panel adhesive failure |
| *Unblasted Stainless Steel | 1400 | Stud and panel adhesive failure |
| *Unblasted Galvanized Steel | 800 | Panel adhesive failure |
| *Smooth Plate Glass | 1500 | Glass cohesive failure |
| *Unblasted Aluminum | 1400 | Stud and panel adhesive failure |
| *Cured Epoxy Coating | 1000 | Stud, coating and panel adhesive failure |
| *Glazed Ceramic Tile | 700 | Tile cohesive failure |
| Dry Concrete | 400 | Concrete cohesive failure |
| Damp Concrete | 400 | Concrete cohesive failure |
| *Vinyl Tile | 500 | Vinyl tile cohesive failure |
| *Wood | 800 | Wood cohesive failure |
| *Substrates were prepared with only an acetone wipe. | ||
